Jining Donghong Machinery Co., Ltd supply ZX140B transmission box/Редуктор для привода ротора for rotary table.The power is inputted through the chain wheel, transferred to the output shaft by clutch ATD318H with a pair of orthogonal snap-in bevel gear. The are two bevel gear on the output shaft and each one can be engaged or disengaged by the engaged equipment, the forward or reverse power is outputted from the flange to the rotary table rotate in forward or reverse direction. The engage equipment can be use by hand, safe and convenient operation. At the end of the output shaft is equipped with a set of brake device which is used for releasing the deformation of drilling pipe slowly after the clutch is off, in case the rotary vengeance, assured the safety of the human body and the installation.
Contact Us
Spareparts1960@foxmail.com
Max. Rotary Torque: 14kn.m
Gear Ratio : I=27/28
Max. Input rotating speed: 1250r/min
Input Chain Wheel Type: 38 teeth .44.45 pitch double row
Distance From Chain Wheel to Center of Input Shaft: 973mm
Distance from Flange to Center of Input Shaft: 759mm
Height of Installation Center of Gearbox: 640mm
Clutch Model: ATD318H
Type: Axial disc
Transferred Torque:19kN.m
Overall Sizes:1728× 1034 ×1040mm
Mass: 1320kg
Max. Rotary Torque: 14kn.m
Gear Ratio : I=27/28
Max. Input rotating speed: 1250r/min
Input Chain Wheel Type: 38 teeth .44.45 pitch double row
Distance From Chain Wheel to Center of Input Shaft: 973mm
Distance from Flange to Center of Input Shaft: 759mm
Height of Installation Center of Gearbox: 640mm
Clutch Model: ATD318H
Type: Axial disc
Transferred Torque:19kN.m
Overall Sizes:1728× 1034 ×1040mm
Mass: 1320kg
没有评论:
发表评论