Fiow rate(L/min): 110
Fitr.(μm): 1
Dia.(mm): 20
Press(MPa): 1
Weight(kg): 0.9
Mode of element: LH0110R* BN/HC
This kind of fiter is used in the hydraulic system for fine filtration.The filter can filter metal impurity,rubber impurity or other contamination,and keep the tank clean.This filter can be installed on the top of the cover directly or installed with pipe.It has indicator and by-pass valve.When the dirt accumulate in the filter element or the temperature of the system is too low,and the oil inlet pressure reaches 0.35MPa,the indicator will give signals showing the filter element should be
cleaned,changed or rise the temperature.If no service is done and as the pressure reaches to 0.4Mpa,the by-pass valve will open.The filter element is made of glass fiber;so it has high fitration accuracy,low initial pressure loss,high dirt-holding capacity and so on.Filter radio β 3,5,10,20≥ 200,filter efficiency n≥99.5%,and fit the ISO standard.
Jining Donghong Machinery Co., Ltd
www.dhparts.com
spareparts1960@foxmail.com
dh@dhparts.com
Mobile/WhatsApp: 0086-18954079939
Skype: spareparts1960
API OSHA IADC OPEC RIG ZONE WORLD OIL Drilling Formulas
没有评论:
发表评论